This tutorial assumes that you have sucessfully connected your wifi mobile to your wifi router and you can browse the web from your mobile using this connection. 

To connect your e-series or n-series Nokia phone that has wifi and SIP capabilites you will need to enter the settings described below:

SIP Settings:

Profile name: Voxalot
Service profile: IETF
Default access point: <for you to define>
Public user name: sip:xxxxxx@us.voxalot.com <- where xxxxxx is user Voxalot user name. If you want to use the Australian cluster set to sip:xxxxxx@au.voxalot.com and for Europe set sip:xxxxxx@eu.voxalot.com
Use compression: No
Registration: Always on
Use security: No

Proxy server:

Proxy server address: sip:us.voxalot.com <- If you want to use the Australian cluster set to sip:au.voxalot.com and for Europe set sip:eu.voxalot.com

Note: Older version of firmware require IP addresses. If that is the case use:

Proxy server address: sip:64.34.163.35 <- For the Australian cluster use sip:202.60.75.46 and for Europe use sip:85.17.19.194

Realm: voxalot.com
User name: xxxxxx. <- where xxxxxx is user Voxalot user name
Password: <your Voxalot password>
Allow loose routing: Yes
Transport type: UDP
Port: 5060

Registrar server:

Registrar server address: sip:us.voxalot.com <- If you want to use the Australian cluster set to sip:au.voxalot.com and for Europe set sip:eu.voxalot.com
Realm: voxalot.com
User name: xxxxxx. <- where xxxxxx is user VoXaLot user name
Password: <your Voxalot password>
Allow loose routing: Yes
Transport type: UDP
Port: 5060

Once the eSeries is registered, to test inbounds from any other phone dial any of the SIP Broker access numbers found here:

http://www.sipbroker.com/sipbroker/action/pstnNumbers

At the voice prompt, dial *010xxxxxx <- where xxxxxx is user Voxalot user name

Your wifi mobile should ring. If you are having issues please visit the forum for help.